In brief
Most ZKTeco fingerprint and face terminals can send every punch straight to cloud HR software using ADMS (push). You enter the server address in the device’s Cloud Server Setting, register the device’s serial number in the HR software, and match each employee’s device ID — after that punches arrive in real time with no USB or software on a PC.
ADMS push vs pulling from a PC
Older setups install software on a PC that pulls punches from the device over the office network, or copy logs with a USB stick. With ADMS the device itself sends each punch to the server over the internet as it happens, so it works from any branch, survives a PC being switched off, and needs no one to remember the monthly download.
Setup in six steps
- 1Check that the ZKTeco device supports ADMS (on the device: Menu → Comm. → Cloud Server Setting).
- 2Note the device serial number from Menu → System Info.
- 3In KormoLink HR, open Attendance Devices, choose Add Device, pick ZKTeco and ADMS, and enter the serial number exactly.
- 4On the device, enter the server address and port shown by KormoLink HR in Cloud Server Setting, and set HTTPS as shown.
- 5Make sure each employee’s ID on the device (PIN) matches their biometric ID in KormoLink HR.
- 6Make a test punch and check that it appears in today’s attendance within a minute.
If punches do not arrive
| Symptom | Likely cause | Fix |
|---|---|---|
| Device shows offline | No internet on the device, or wrong server address | Check the network cable or Wi-Fi and the address in Cloud Server Setting |
| Device online, no punches | Serial number in HR does not match the device | Copy the serial exactly from System Info |
| Punches arrive for some staff only | Device IDs (PINs) do not match employees’ biometric IDs | Correct the biometric ID on the employee record |
| Wrong punch times | Device clock or time zone is wrong | Set the device clock to Bangladesh time (UTC+6) |
Security
In KormoLink HR, a switched-off device is refused, a device can only acknowledge its own commands, and punches dated far in the future are dropped. Offices with a fixed internet line can also restrict a device to its own public IP address.
Frequently asked questions
Which ZKTeco devices work with cloud HR software?
Models that support ADMS (push to a cloud server), which you can check in Menu → Comm. → Cloud Server Setting. Most current ZKTeco fingerprint and face terminals do.
Do I need a computer running all the time?
No. With ADMS the device sends punches to the server over the internet by itself.
Can one company use devices at several branches?
Yes. Each device is registered with its branch, and all of them send punches to the same KormoLink HR account.
Can new fingerprints be enrolled from the software?
KormoLink HR can push employee records to the device and start fingerprint enrolment, so staff do not need to be typed in on each device.
Sources
- ZKTeco device menus (Comm. → Cloud Server Setting; System Info)
- KormoLink HR Attendance Devices page
This guide explains the rules in plain language for HR teams; it is not legal or tax advice. Laws, rules and Finance Acts change — check the current text, your service rules and, where needed, a lawyer or tax adviser.